The thin oven temperature sensor held by two screws high on the back wall of an empty range oven, a rack slid out below it.

Wolf legacy dual-fuel range
showing 03

ERR 03 tells you the legacy dual-fuel control sees an open circuit on the RTD, the resistance sensor inside the oven that reports cavity temperature.

(844) 875-7576

Mon–Sat, 8am–8pm

  • Temperature sensor
  • Temperature sensor and thermostat repair
  • Source: Wolf

Book a visit

Three short steps, about a minute.

or call (844) 875-7576

Before you book,
in this order.

Each step comes from Wolf's own guidance for 03 on its ranges. Follow it to the end: the last card says whether this is a visit.

01

Cycle the breaker off for about 30 seconds, turn it back on and run the oven once more.

02

If ERR 03 comes back or the cooling fan never stops, book a visit.

Still there?

It usually turns into temperature sensor and thermostat repair. Book with the code and the model number.

What not to do

A cooling fan that runs non-stop is a side effect listed under ERR 03, not a separate fan problem to chase first.

What you may
notice with it.

The range problems 03 tends to arrive with. Answer these at the range before anyone is booked.

All problems

Where 03 usually leads

Temperature sensor and thermostat repair.

Oven temperature sensor, thermostat or calibration · low.

In Wolf's own words

Open circuit detected on RTD oven sensor
Wolf answer: legacy dual-fuel range, error code 03 Wolf answer: legacy dual-fuel range, error code 03

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Legacy Wolf dual-fuel ranges with the oven selector knob display.

Wolf 03 range repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child stirring a pot on a gas range together in a bright kitchen
For the heart of your home.

Questions
about 03.

Can I clear 03 myself?
Cycle the breaker off for about 30 seconds, turn it back on and run the oven once more. If it comes back, it needs a visit.
Why is the fan still running on my Wolf range with ERR 03?
Wolf lists a cooling fan that never stops among the signs of ERR 03. With no trusted temperature reading, the range keeps cooling, and that usually settles once the sensor circuit is repaired.
Can ERR 03 on a Wolf be fixed by recalibrating the oven?
No. An open sensor circuit gives the control no reading to adjust, so an offset setting has nothing to work on. The sensor and its wiring have to be tested.

Back to your everyday

Still showing 03?

Book with the code exactly as it appears, the full model number, and whether you notice any smell of gas or scorching — with a code, that is where the diagnosis begins.

(844) 875-7576 Schedule a repair